RV Water Inlets - 3-5/8 Inch Deep

Hey Dale, welcome back! Looking at it now on the #324-000110 that is a terrible design. I would hate to find out I had to pull that thing out just to change/adjust the temperature. The only option we have that may fit in that space is the Norcold RV…

Hey Bryan, We do not carry the garden hose adapter for that unit. We do have a replacement hose with hand sprayer #PF267003 that would work with that units quick-connect shower port. Are you specifically looking for one or the other? Or just seeing…

Hey Rob! The pin for the Ultimate Trailer Jack #322-RDJ-2K sits 3/4" above the mounting plate, is 1" thick, and sticks out 3" from the body of the jack (see attached photo). The bolt pattern for the mounting plate is symmetrical so you…

Hey David, welcome back. To add a 4-way connector to your 2025 Kia Sportage PHEV, you'll want the Curt item #C99DR. It connects directly behind the rear tail lights and there isn't a way to connect it to a tow package. It will not control a…

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

Hello Edwin, Just as long as your Ford F-150 is a 2010-2019 the Adapter Rails for PullRite SuperGlide 5th Wheel Hitch - Ford Towing Prep Package #PUL55RR will convert it to your puck system. We had a customer confirm that it worked for his 2024 F-350…

Hey Spencer, you can replacement your Dometic Penguin II AC Units with the Furrion Chill Cube part #FR99TD but these would both be considered single zone units that wouldn't be able to connect to a single thermostat. With that said the included…

Since they didn't list the converter amperage rating on your panel you'll have to just choose the amperage your battery bank requires and then do a bit of investigative work to ensure that the wire gauge used for the converter is enough to…

I believe you are referring to slide-out supports, and it's pretty simple to choose the right one. All you need to do is measure from the ground to the bottom of the slide out track to get the correct height; the photo below shows where you want…

Hey Peter thanks for the information. We have found out in the last year that the Advent replacement options either don't work at all, are a mess to rewire because the pins don't line up with the correct functions, and they always void the…

You will be able to replace your Coleman Mach 48254A866 with the Advent #ACM150 provided you use the Wiring Kit #ACCOLKIT. This wiring kit adapts the 6-pin wiring on the Advent to the 9-pin connection used on your Coleman control box.

No, I am sorry Don. The Gen-Y Torsion Weight Distribution Shank - 2-1/2" Hitches item #GY92NR does not fit the B&W Continuum Weight Distribution System item #BW78FR. The shank on the Continuum is quite a bit wider than the standard size on a…